BYD ATTO 3 - Driving Safety Systems

4-5 Driving Auxiliary Functions 175
4
Application and Driving
● Any person near the vehicle (depending on the type of the person's
clothes).
■ Any image displayed on the multimedia display screen* or sound of the
speaker indicates that the sensor has detected an obstacle, or that the
sensor has been disturbed by external objects. It is recommended to drive
the vehicle to a BYD authorized service provider for inspection if such a
phenomenon exists continuously.
Attention
■ Do not wash the positions of sensors with water or steam. Otherwise, a
sensor failure will be caused.
Driving Safety Systems
To improve running safety of the vehicle, the following driving safety systems
will work automatically according to various running conditions. However, be
sure to keep in mind that these systems only provide assistance, so
over-dependence on them should be avoided when driving the vehicle.
Integrated Power Brake (IPB)
■ Integrated parking brake system (IPB) is an advanced decoupled
electro-hydraulic brake system, which integrates the functions of vacuum
booster, electronic vacuum pump and ABS/ESC.
■ IPB can provide assistance for vehicle braking according to the driver's
braking demand, improving the vehicle stability and comfort, and
increasing the braking energy recovery efficiency.
Vehicle dynamic control(VDC)
When the running vehicle takes a sudden turn, if the vehicle deflects from the
normal running route, VDC will make corrections by applying braking force to
corresponding wheels, so as to help the driver to control sideslip and maintain
the directional stability of the vehicle.
TCS traction control system(TCS)
TCS can prevent driving wheels from sliding during accelerated running. If
necessary, TCS will apply braking force for the purpose of control, so as to
prevent slipping of driving wheels. Under unfavorable running conditions, TCS
makes the vehicle easy to start, accelerate and climb the hill.