BYD ATTO 3 - Passengers Window Regulator Switch; Hazard Light Switch; Mode Switch Set

3-4 Switches 93
3
Operation of Controller
Passenger's Window Regulator Switch
When the vehicle is powered OK, the
front passenger and rear right door
window regulator switches can be
used to regulate the front passenger
and rear right door windows
respectively.
Hazard light switch
By pressing the button , all turn
signals will start to flash and the turn
signal indicator on the dashboard will
flash synchronously. By pressing the
button again, the turn signals and
the turn signal indicator will stop
flashing.
Attention
■ After being turned on, the hazard lights can warn pedestrians and other
vehicles to avoid causing hazard.
Mode Switch Set
Select the corresponding working mode by toggling the “Feedback Mode”
button, “Snow Mode” button and “Mode” button.
① Feedback mode button
■ Standard feedback mode by
default;
■ Move the shift lever
①
upward
to trigger larger feedback.
②
Snow mode button