BYD ATTO 3 - Front Left Door Switch Set

3-4 Switches 89
3
Operation of Controller
Front Left Door Switch Set
Power window switch
■ With the vehicle powered OK, opening and closing of vehicle windows may
be controlled by the regulator switch of each side window. With the vehicle
power OFF, all the power windows cannot be regulated.
■ There are four regulator switches
equipped on the driver's door for
the driver to control all the
windows on four doors.
● Down – press the switch.
● Up – pull up the switch.
■ In the process of window
regulation, if you stop operating
the switch, corresponding window
will stop there.
■ Lowering window: Press the switch button to the second mode and then
release it to allow the window to open automatically.
■ Raising window: Pull up the switch button to the second mode and then
release it to allow the window to close automatically.
■ If it is necessary to stop opening or closing the window, just gently
press/pull the switch to the opposite direction.
Delay function*
■ After the vehicle is powered off, if the front doors are not opened, the four
door window controllers have delay of 10 min. In this period, the windows
can be regulated.
■ After the vehicle is powered off, if either of front doors is opened, the four
door window controllers can no longer be used to regulate the windows.
Intelligent window control function*
■ When the function is activated in the multimedia system (for details, refer to
the multimedia system settings): press and hold the "UNLOCK" button of
remote control to enable the windows to open automatically; press and
hold the "LOCK" button of remote control to enable the windows to close
automatically; release the button during opening/closing of the windows to
stop them.