BYD ATTO 3 - Brake System; Washer

6-3 DIY Maintenance 229
6
Service and Maintenance
Brake System
■ The fluid level in the fluid reservoir should be checked once a month and
the brake fluid should be replaced according to the running time and
mileage specified in the maintenance schedule.
■ Be sure to use the brake fluid of the same specifications as those of the
original one. Never mix brake fluids with different models.
■ A satisfactory fluid level in the
reservoir should be between the
"MAX" (maximum fluid level) and
"MIN" (minimum fluid level) marks.
■ If the instrument shows that the
brake fluid level is low, it is
necessary to check whether the
brake system leaks and whether
brake pads are worn.
Washer
■ During the period of normal service,
check the fluid level in the fluid
reservoir of windshield washer at
least once a month.
■ If the washer is used frequently in
bad weather, check the fluid level in
the fluid reservoir more frequently.
■ Add high-quality windshield
washing fluid, which can improve
the decontamination ability and
prevent freezing in cold weather.
■ When refilling washing fluid into the fluid reservoir, dip a piece of clean
cloth into windshield washing fluid and then clean the windshield wiper
blades with the cloth. This is helpful to making the cutting edges of wiper
blades be in a good service condition.
Attention
■ Do not refill acetic acid solvent into the fluid reservoir of windshield washer.
■ It is recommended to use qualified windshield washing fluid.