192 5-1 Air Conditioning System
Functions
Automatic mode button
■ After this button is pressed, the button indicator will illuminate(the indicator
of the automatic button on the front A/C panel lights up), and the
compressor state, blower speed and air outlet mode will be automatically
adjusted.
■ If the blower speed level and air outlet mode is set, the full-automatic
control mode will be deactivated. Functions will remain in automatic mode
except the functions for operation.
A/C ON/OFF button
■ When the A/C is on, press the button to turn off the A/C.
■ When the A/C is off, press the button to turn on the A/C.
Maximum cooling button
■ Press the button to operate in the maximum cooling mode. In this mode,
the compressor is turned on, the temperature is adjusted to Lo, the blower
speed is adjusted to the maximum level, the air inlet mode turns to interior
air recirculation, and the air outlet mode is the face level vent.
■ Tap this button again to exit the maximum cooling mode.
A/C cooling button
■ Press this button to turn on the A/C compressor. The icon will illuminate
and the compressor will start to achieve cooling.
■ Press this button again to turn off the A/C compressor and the compressor
will stop.
Internal/external air recirculation mode button
■ Press the internal/external air recirculation mode button to set the air inlet
mode to internal air recirculation, with the icon displayed.
■ Press this button again to set the air inlet mode to external air circulation,
with the icon displayed.
■ When the parking automatic internal circulation is activated, the mode will
be switched to internal air recirculation during parking to ensure the air
quality in the vehicle and prevent the exhaust gas entering the vehicle.
To Next Page
Loading...
