5-3 Other Devices 201
12V Backup Power Supply
■ The backup power supply can
provide power for accessories
whose operating voltage is DC 12V
and operating current not more than
10A.
■ When using the 12V backup power
supply, open its cover and vehicle
power must be in OK mode.
Cellphone Wireless Charging Position
■ The cellphone wireless charging function is used to charge the cellphone
by electromagnetic wave induction without wire connection.
■ Pull down the "Quick" menu of multimedia system, and light up the setting
icon for cellphone wireless charging function.
■ After the vehicle starts, place the
cellphone in the wireless charging
area, with its screen facing up, to
activate automatic wireless
charging mode.
■ To turn off the cellphone wireless
charging function, pull down the
PAD "Quick" menu, and tap the
setting icon for cellphone wireless
charging function (the indicator will
go out).
■ The cellphone wireless charging function is not applicable to all cellphones,
but only to QI-certified ones.
■ Do not place chip cards such as bank cards between the mobile phone
case and the mobile phone during charging to avoid burning out the cards.
To Next Page
Loading...
