BYD ATTO 3 - Vehicle Identification

8-1 Data Information 261
8
Vehicle Specifications
Vehicle identification
Vehicle identification number (VIN):
① It is pasted on the transmission body;
② It is pasted to the inner sheet metal surface of the front compartment hatch;
③ It is pasted to the sheet metal of the trunk lid;
④ It is pasted on the VIN code slot on the upper cover of lower beam of front
windshield;
⑤ It is pasted to the sheet metal surface in the rear right wheelhouse;
⑥ It is pasted to the inner sheet metal surface of the rear left door sill;
⑦ It is pasted on the sheet metal surface in the lower left corner of the front
left door;
⑧ It is pasted on the sheet metal plane at the upper edge of the front
anti-collision beam;