■ Make sure that the intelligent key is more than 25 cm away from the
wireless charging area when the cellphone wireless charging system is
working.
■ To avoid causing abnormality of the wireless charging function or even
safety accidents, do not place coins, metal keys, metal rings or other
objects containing metal components together with the cellphone in the
wireless charging area.
■ To avoid causing damage to the charging area, do not place heavy objects
in this area. Contact a BYD authorized service provider if the cellphone
wireless charging system is faulty and cannot be used normally.
■ BYD will assume no responsibility for any problems caused by abnormal
use of the product. If the product has been disassembled or modified, the
free warranty service will be terminated.
■ To avoid potential safety hazards, do not place the cellphone in the vehicle
for charging when the driver leaves the vehicle.
■ To avoid potential traffic safety hazards, do not check the charging status
of the cellphone for a long time during driving.
■ To prevent scald, do not remove the foreign matter directly by hand if any
metal foreign matter is found between the cellphone and the rubber pad
when the cellphone is in the wireless charging mode.
■ To achieve better charging effect, make sure that the center of the
cellphone coil is aligned with the center of the wireless charger (the position
provided with the words "charging area"), otherwise, it may fails to be
charged.
■ Do not spill any water in the charging area; otherwise, water will enter the
wireless charger through the gap of the rubber pad and cause a charger
failure.
■ The cell phone may stop charging if the temperature is too high. In this
case, the cellphone will continue charging after cooling down.
■ BYD does not promise to solve the problems caused by the connection of
an external wireless charging coil. Please use it carefully.
To Next Page
