EasyManua.ls Logo

BYD ATTO 3 - Page 33

BYD ATTO 3
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-3 Child Restraint System 33
1
Safe
2. Lift the headrest, attach the clip to
the anchorage lever behind the
backrest and tighten the top
tether. Make sure that the top
tether is attached securely.
Top tether
Anchorage lever
3. Re-adjust the headrest to a proper
position.
If the driver's seat obstructs the correct installation of the child restraint
system, install it on the rear right seat.
Do not use a rearward facing child
restraint system on a seat
protected by front air bag
(activated). Otherwise, when an
accident occurs, the impact force
applied when the front passenger
air bag deploys rapidly will cause
severe injury or even life threat to
a child there.
WARNING
Push/pull the child safety seat to different directions and make sure it has
been securely installed.
When using a lower anchor, make sure that no foreign objects are around
the anchor, the seat belt is not stuck behind the child safety seat and the
child restraint system is fixed securely. Otherwise, severe injury or even life
threat may be caused to a child there in case of emergency stop or
accident.
Do not install a child safety seat in the front seat.

Table of Contents

Related product manuals