BYD ATTO 3 - Page 91

3-4 Switches 91
3
Operation of Controller
Attention
■ Initializing the anti-pinch function too frequently will result in overheat
protection of the regulator motor.
■ Do not activate the anti-pinch function by intentionally causing the window
being obstructed by any part of human body.
■ The anti-pinch function may not work if the window is obstructed by any
object when it is about to be closed fully.
■ It is recommended that a BYD authorized service provider should be
contacted for maintenance if the automatic closing function and the
anti-pinch function of windows do not work.
Window lock switch*
■ By pressing this button, the front left
main control switch can control the
lifting of the four-door window control
switch; the front right window control
switch can control the lifting of glass;
the rear door window control switch
cannot control the lifting of glass.
■ Press the window lock switch again,
the indicator will go out and the
window regulator switches beside
each passenger will be enabled.
Console Door Lock
Power door lock switch is equipped on
the driver's door. These two switches
are for locking or unlocking all the doors.
① Locking
By pressing the lock button on the
console door lock, all the four doors will
be locked at the same time and the red
locking indicator will illuminate.