EasyManua.ls Logo

BYD ATTO 3 - Page 97

BYD ATTO 3
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-4 Switches 97
3
Operation of Controller
WARNING
■ Extremely serious injuries may be caused to passenger's hands, fingers or
head once pinched by the closing sunroof.
■ Never extend head, hands or any bodily parts outside the sunroof when
vehicle is running; otherwise, serious injuries or even life threat will be
caused.
Attention
■ The sunroof or the motor may be damaged if you attempt to open the
sunroof in an environment with the temperature below 0°C or when the
sunroof is covered by snow or ice.
Initialization method
■ With the vehicle powered OK, the signal kept valid and the sunroof not
initialized, try to conduct initialization setting as per the following
operations:
■ Manually close the sunroof/sunshade to the fully closed position and keep
it, and then release it after more than 0.5 to complete the initialization of the
sunroof/sunshade.
■ If the sunroof/sunshade cannot be completely closed, calibrate it manually.
Press and hold the sunroof/sunshade close button, release it when the
sunroof/sunshade stops moving, and press and hold the close button for
more than 7s until the sunroof/sunshade is completely closed and “click” is
heard.
■ The sunroof and the sunshade curtain are initialized separately.

Table of Contents