1.
Disconnect the Intake
Air Temperature (IAT)
sensor
from
the base of
the air cleaner.
2.
With
a
screwdriver,
loosen the air duct
clamp, which is located
at the mass airflow
sensor end of the
air duct.
L
4.
Unhook both air cleaner cover latches. One latch
is
located near the radiator hose (not shown) and the
other latch-is located next to the
UT
sensor.
5.
Pivot the air cleaner and air duct assembly toward
the front of the vehicle. Remove the cover.
3.
Disconnect the air duct from the mass aifflow sensor.
6-16
To Next Page
Loading...
Need help?
General
