Cafection TOTAL LITE - Recipes Tab - Liquids and Ingredients

TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION TOTAL LITE Single-Cup Brewer
42
7.7 Electrical Connection

This equipment must be installed in compliance with applicable Federal, State and/or
Local electrical codes having jurisdiction.
Make sure:
- The equipment is OFF before plugging it in,
- The equipment has its own electrical outlet and
- No extension cord is used.
1. Make sure that the power switch in the back of the unit is in the OFF position before plugging in the
unit;
2. Locate the unit’s 6 foot power cord and plug it into its own grounded electrical outlet;
3. Reach to the back of the brewer and toggle the power switch to the On position. The screen will turn
on and white text on black background will scroll for about 1 minute. While the computer is starting,
the water tank will ll automatically in about 2-3 minutes;
4. Once the tank is full, it will take 15-20 minutes to heat the water to brewing temperature. ;
5. Once the brewing equipment is ready, the selection screen will appear.
The main power switch turns the equipment off and on. This switch should be turned OFF when servicing
any (AC line voltage) electrical components on the equipment.
Initial Setup
Off position