TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION TOTAL LITE Single-Cup Brewer
62
10 SERVICING PARTS
This section is intended to assist you in servicing various parts of the unit.
10.1 Draining the Hot Water Tank
We recommend allowing 3 hours for the hot water to cool prior to emptying the tank. Make sure you have
a 0.8 gallon container suitable for holding hot water.
1. Turn off and unplug the brewer;
2. Turn off the main water supply of the machine;
3. Remove the back panel;
4. Locate the drain tube with a red plug;
5. Direct the tube into the pail and remove the red plug. Warning, water may be hot!;
6. Drain the water from the water tank completely;
7. Reinstall by repeating these steps in the reverse order.
Drain tube
Red plug
Servicing Parts
To Next Page
Loading...
