Cafection TOTAL LITE - Error Message List (Continued)

TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION TOTAL LITE Single-Cup Brewer
69
11.2 Error message list (continued)
Low water level in tank.
The water tank tank failed to ll to maximum within the required time. The water inlet valve is de-
activated as a safety.
Maximum lling time is 4 minutes when you power ON the coffee brewer.
Maximum lling time is 1 minute after the rst tank ll.
Check water supply line for proper pressure. If you are using a waterline lter, it might be worn out and
needs to be replaced.
Press button on screen to restart the tank lling process.
Water tank not full. Please wait while lling. 1 to 3 minutes.
This message will be on screen after powering ON the coffee brewer until water tank gets full.
Water temperature not high enough.
The TOTAL LITE will stop dispensing drinks if actual water temperature is below the ‘Warming up’
temperature in the service menu, ‘system’ tab. To disable this feature set the warming up temperature
to 0.
Troubleshooting