Cafection TOTAL LITE - Stainless Coffee Chute

TOTAL LITE Revision 1
SERVICE MANUAL FOR INNOVATION TOTAL LITE Single-Cup Brewer
56
8.7.5 Stainless coffee chute
Frequency: Monthly or every 1,000 cycles
1. Open the door of the machine;
2. Remove the lter paper;
3. Remove the grinder protector;
4. Unplug the 2 connectors from the solenoid;
5. Remove the stainless chute by removing the screw;
6. Clean the stainless chute by rinsing with hot water;
7. Make sure it is dry before reinstalling.
Repeat the steps in reverse order after cleaning
for the reinstallation.
Cleaning & Sanitizing
Stainless coffee
chute
Stainless
coffee chute
screw
Black connnector
(at the back)
Red connector
(in the front)