CALIENT S Series User Manual

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 29 of 63
 System Shutdown – issues a shutdown of the entire system. Power has to be
reconnected to bring up the system again. If the Standby CP is not reachable,
the system will not be shut down.
4. Click the radio button next to one of the command options to select that command.
5. Click the Apply button at the bottom of the screen to implement the specified
command.
4.5 Node > Summary > Session Management
The following procedure describes how to access the system’s Session Management tools using
the WebGUI:
1. Log into the WebGUI.
2. Navigate the following path: Node > Summary.
3. Click the Session Mgmt tab on the Node Summary screen. The Session Management
screen will open, displaying a list of Web and/or TL1 sessions currently active on the
system.

CALIENT S Series Specifications

General

Brand	CALIENT
Model	S Series
Category	Switch
Language	English