CALIENT S Series User Manual

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 31 of 63
a. Type a message in the Broadcast Message Area field.
b. Click the Send to All Users button to send the message to all listed users, OR
c. Click the Send to Selected User button to send the message to a specific user(s), OR
d. Click the Cancel button to disregard the broadcast message.
7. Click the End Session button at the bottom of the Session Management screen to end
the session for the selected user(s).
4.6 Node > Summary > User Management
The following procedure describes how to access the system’s User Management tools via
the WebGUI:
1. Log into the WebGUI.
2. Navigate the following path: Node > Summary.
3. Click the User Mgmt tab on the Node Summary screen. The User Management screen
will open, displaying a list of all system users.
4.6.1 Creating a New User
The following procedure describes how to create a new system user with the WebGUI:
1. Navigate the following path: Node > Summary > User Mgmt.
2. Click the Create New User button at the bottom-right of the User Management screen.
The Create User screen will open.

CALIENT S Series Specifications

General

Brand	CALIENT
Model	S Series
Category	Switch
Language	English