CALIENT S Series - Setting Aliases from Cross Connects > Add

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 61 of 63
3. Click an item in the PortDescription column to select it. The Port Detail screen for the
selected item will open.
4. In the Port Monitor Configuration section of the screen, type the appropriate alias
information in the Port In Alias and Port Out Alias fields.
5. Click the Save button at the bottom of the screen to save the information.
9.3 Setting Aliases from Cross Connects > Add
The following procedure describes how to configure port aliases from the Add Cross
Connection screen:
1. Log into the WebGUI.
2. Navigate the following path: Cross Connects > Add. The Add Cross Connection screen
will open.