❶
❷
UNI 6954 ø 3,9 x 13
Page 32 - Manual FA01358-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
WHAT TO DO IF ...
ISSUES POSSIBLE CAUSES POSSIBLE FIXES
The operator opens but
will not close
• Power supply is missing
• The gear motor is stuck
• The transmitter emits a weak signal
or no signal
• Button/s and/or selectors stuck
• Check main power supply
• Lock the gear motor
• Replace the batteries
• Check that the devices and the
electric cables are in proper
working conditions
The operator opens but
will not close.
• The photocells are working • Check that there are no
obstructions in the range of
operation of the photocells
⚠ If the problem cannot be solved by following the fi xes in the table or if any malfunctions, anomalies,
noises, vibrations or suspicious and unexpected behavior is experienced on the system, call for qualifi ed
assistance.
FINAL OPERATIONS
Do the fi nal operation only once the connections are complete and the system is started up.
Page 32 - Manual FA01358-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions