CAME VER-PLUS Series - Installation Process; Standard Installation Steps

RX
TX
❶
❷
❸
❹
❾
❼
❺
❻
❽
❻
Page 9 - Manual FA01358-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Standard installation
1. Operator
2. Guide
3. Release device
4. Transmission arm
5. Key-switch selector
6. Photocells
7. Control device
8. Sensitive safety-edge
9. Flashing light and antenna
Page 9 - Manual FA01358-EN - 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructions