Canon DC 210 - Setting the Date and Time

Setting the Date and Time
_L_[ DATE/TIME SETUP J
[ DATE/TIME JAN. 1, 2007 12:00 AM]
,,.c. FoNc O
( E_ 25)
1 Press _.
2 Select (YA) the _ icon and press
(_)) to open the setup menus.
3 Select (VA) [DATE/TIME SETUP]
and press (@).
4 Select (TA) [DATE/TIME] and press
The first field of the date will be
displayed in orange and indicated with
up/down arrows.
5 Push the joystick (VA) to set the
date and time and (4_) to move
between the fields of the date and
time,
6 Press (_)) to start the clock,
7 Press _ to close the menu.
• When you do not use the camcorder for about
3 months, the built-in rechargeable lithium
battery may discharge completely and the date
and time setting may be lost. In such case,
recharge the built-in lithium battery (C/3 73) and
set the time zone, date and time again.
• You can also change the date format ([Z] 42).
• =e_ First Time Settings
II