EasyManua.ls Logo

Canon DC 210 - Basic Recording Functions

Canon DC 210
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
_o*o Recording
l Whenusinga tripod: Do not
leave the viewfinder exposed to
direct sunlight as it may melt
(due to concentration of the light
by the lens). Do not use tripods
with fastening screws longer
than 5.5 mm (0.2 inch). Doing
so may damage the camcorder.
Whenrecording movies,try to get a calm, stable
picture.
Excessive camcorder movement while shooting
and extensive use of fast zooms and panning
can result in fidgety, jittery scenes. In extreme
cases, the playback of such scenes may result
in visually induced motion sickness. If you
experience such a reaction, immediately stop
the playback and take a rest break as
necessary.
Reviewing the Last Scene Recorded
1 Ifthejoystickguidedoesnotappear
on screen, press (_)) to display it.
2 Push the joystick (4) toward (_.
if _ does not appear on the joystick
guide, repeatedly push the joystick
(_') toward [NEXT] to display the
joystick guide in the illustration above.
When the mode switch is set to AUTO,
only one joystick guide will appear.
The camcorder plays back the last
scene (but without sound) and returns
to record pause mode.
While reviewing the scone, select
(<l_) the _._ icon and press (_))to
return to the recording mode.
If you are using a DVD-RW disc, you
can also delete the scene immediately
after recording it. Select (_) the /_
icon to delete the scene while
reviewing it (E1355).
Selecting the Aspect Ratio of your
Recordings (16:9Widescrconor4:3)
You can select the aspect ratio of your
recording to match your TV. The
camcorder uses the full width of the CCD
providing high-resolution 16:9 recording.
I ( 12)
* Default value
_ CAMERASETUP
g
I WIDESCREEN _ ON*
1 Press _.
2 Select (j,Y) the _ icon and press
(_)) to open the setup menus.
3 Select (AY) [CAMERA SETUP] and
press (_) ).
4 Select (AY) [WIDESCREEN] and
press (_) ).
5 Select (AV) a setting option and
press (_) ).
The default is widescreen (16:9)
recordings. Set itto [E_l OFF] to
record movies in the normal (4:3)
aspect ratio.
6 Press _ to close the menu.
Since the displays on the camcorder have an
aspect ratio of 16:9, recordings with a 4:3
aspect ratio will appear in the center of the
screen with black sidebars.
When recording in widescreen mode, with
[IMG STAB] set to [6 OFF] (CCJ38), you can
have a wider view angle.
Playingback a widescreen recording:TV sets
compatible with the Video ID-1 system will
automatically switch to wide (16:9) mode.
Otherwise, change the aspect ratio of the TV
m
0o
'11
O
g}

Table of Contents