o_,ooAdjustingthePicture:Exposure,FocusandColor
3 Adjust (41_) the focus as required
until the image appears focused.
• Push the joystick ( _,,) toward A for a
farther focal distance or push it (4)
toward -" for a closer focal distance.
• Pushing the joystick (A) toward
[FOCUS] again will return the
camcorder to autofocus.
White Balance
The white balance function helps you
accurately reproduce colors under
different lighting conditions so that white
objects will always look truly white in your
recordings.
II
• The camcorder will automatically return to
autofocus when you set the mode switch to AUTO.
• Readjust the focus when you have turned off
the camcorder.
Infinity Focus
Use this function when you wish to focus
on faraway subjects such as mountains or
fireworks.
(_i3 12)
Adjust the zoom before you start the
procedure.
Mode switch: P
1 Ifthejoystickguidedoesnotappear
on screen, press (_)) to display it.
2 Keep the joystick pushed (A) toward
[FOCUS] for more than 2 seconds.
• co appears.
• Pushing the joystick (A) toward
[FOCUS] again will return the
camcorder to autofocus.
If you operate the zoom or the joystick (_ll_)
during infinityfocus, oo changes to "Mr" and the
camcorder returns to manual focusing mode.
I 12)
Mode switch: P
Options ° Default value
Settings are automatically set by the
camcorder. Use this setting for outdoor
scenes.
For recording outdoors on a bright day.
For recording under tungsten and tungsten
type (3-wavelength) fluorescent lighting.
Use the custom white balance setting to
make white subjects appear white under
colored lighting.
( _] 25) _j
IIcon of the currently selected
IWhiteBalance
FUrFUN_.I ¢_IDesired option*
* When VOUselect [_ SET], do not press
and continue instead with the
procedure below.
To Next Page
Loading...
