Playback....
• The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
• Avoid the following actions while the disc
access display (_ _)) appears on screen, and
when the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover and do not remove
the disc.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the '_,/Q
switch or the operating mode.
Slideshow
SLIDESHOW
FUNC. _uN¢._ @ 4_÷
( [_ 25) _/
1 Press [_.
2 Select (AY) [_'>SLIDESHOW] and
press (@).
3 Select (_) [START] and press
(@].
• Images are played back one after
another.
• Press _ to stop the slideshow.
Index Screen
1 Move the zoom lever toward W.
The still images index screen appears.
2 Select (AV, 41_ ) an image.
• Move the green selection frame to
the image you want to view.
• tf you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the zoom
lever toward W to extend the green
selection frame to the whole page, and
move (<_) between index pages.
Move the zoom lever toward T to return
to moving between single images.
3 Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
TO RUNTHROUGHTHESTILLIMAGES
Push the joystick (_) or (_l_) and hold
it pressed down to run quickly through
the still images.
TO SKIP 10 OR 100 STILL IMAGES
1 Ifthejoystick guidedoesnotappear
on screen, press (_)) to display it.
2 Push the joystick (A) toward ._DD-
3 Select (AV) [.r_0 JUMP 10 IMAGES]
or [.-_'_0oJUMP 100 IMAGES].
4 Jump (_) the number of images
selected.
Press (_)) to close the image jump
screen and display the image. You can
press (_)) again to hide the joystick
guide.
To Next Page
