Fax
5-9
Introduction to Using Fax Functions
DRPD
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive
ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s)
using only one telephone line. Your fax will automatically monitor incoming calls and based on the ring
pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that matches the pattern
assigned by your telephone company. Contact your telephone company for availability.
Before using this mode
Make sure to do the following:
Subscribe to a DRPD service. Contact your telephone campany for availability.
Connect your external telephone to the maxhine. (See “Make Fax Settings,” in the Starter Guide.)
Set the receive mode to <DRPD>. (See “Selecting the Receive Mode,
” on p. 5-10.)
●
●
–
–
–
To Next Page
Loading...
