10-6
Maintenance
Cleaning the Machine
4
Press [ ] or [ ] to select <FIX. UNIT
CLEANING>, then press [OK].
1 F I X . U N I T C L E A N I N G
A D J U S T . / C L E A N I N G
Cleaning starts.
Throw away the cleaning paper after use.
Scanning Area
Keep the scanning area clean to avoid dirty copies
or faxes to be sent.
Platen Glass
Clean the platen glass and the underside of the ADF
by following the procedure below.
1
Open the ADF.
●
2
Clean the platen glass and the underside
of the ADF with a cloth dampened with
water. Then, wipe the area with a soft, dry
cloth.
Do not dampen the cloth too much, as this may
tear the document or damage the machine.
3
Close the ADF.
Be careful not to get your fingers caught.
To Next Page
Loading...
