Canon imageCLASS D480 - Entering Characters; EnterNg Characters

Before Using the Machine
1-12
Entering Characters
Entering Characters
For displays that require alphanumeric entries, follow the procedure below to enter
characters.
Example: Enter <Canon>. For details on entering characters, see “Information About the
Keys,” in the Starter Guide or “Set Up the Machine,” in the e-Manual.
1
Press repeatedly until an uppercase
<C> appears.
C
N A M E [ A ]
2
Press [ ] to move the cursor to the
right, then press until an <a> appears.
C a
N A M E [ A ]
3
Press until an <n> appears.
C a n
N A M E [ A ]
4
Press [ ] to move the cursor to the
right, then press until an <o> appears.
C a n o
N A M E [ A ]
5
Press [ ] to move the cursor to the
right, then press until an <n> appears.
C a n o n
N A M E [ A ]