Canon imageCLASS D480 - Adjusting Density; Adjusting Automatically

Copying
4-8
Adjusting Density
Adjusting Density
You can adjust the density to the most appropriate level for the document either
automatically or manually.
The default setting is <MANUAL> (5).
Adjusting Automatically
You can adjust the density to the most appropriate
level for the document automatically.
1
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2
Press [COPY].
3
Press [Density] twice to select
<AUTO>, then press [OK].
A U T O
D E N S I T Y
The image quality is automatically set to <TEXT>.
4
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
A T E X T 1
1 0 0 % L T R
5
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].