Specifying Paper in the Printer Driver
Specifying Paper in the Printer Driver
If you have replaced the paper, you must complete the following settings in the printer driver.
Important
•
Always specify the same type and size of paper in the printer menu and printer driver.
1
Choose Print in the application menu.
2
Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing the
Printer Driver Dialog Box from Applications .")
➔P.148
3
Make sure the Main sheet is displayed.
4
In the A Media Type list, select the type of paper that is loaded.
Note
•
Click the B Get Information button to display the Paper Information on Printer dialog box. On the Pa-
per Information on Printer dialog box, you can obtain information on the paper in the printer and config-
ure printer driver settings for the feed source and type of paper.
This function requires that the Status Monitor be installed.
5
Click the Page Setup tab to display the Page Setup
sheet.
6
In the A Page Size list, select the size of the original as specified in the application.
7
In the L Paper Source list, select how paper is supplied.
8
If you have selected roll paper in L Paper Source, select the width of the loaded roll in M Roll Paper
Width.
Specifying Paper in the Printer Driver
iPF685
User's Guide
Windows Software Printer Driver
144
To Next Page
Loading...
Need help?
General