3
Select Delete the entire folder, as well as items in
the list above, and then click the Delete button.
4
Read the messag,e and then click the OK button.
Note
•
Select Delete files in the folder to delete only files in the hot folder.
Setting the Print Parameters
Setting the Print Parameters
You can set the print conditions in the setting panels within the Add/Edit Hot Folder dialog box.
The settings available on each panel are as follows.
•
Paper Settings Panel âž” P.318
•
Output Settings Panel âž” P.321
•
Color Settings Panel âž” P.323
Paper Settings Panel
Paper Settings Panel
•
Easy Settings / Advanced Settings
Two modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
•
Easy Settings âž” P.319
•
Advanced Settings âž” P.320
•
Media Type
This allows you to select the media type.
Note
•
Always select media type that is actually set in the printer. When the media you chose is different from the
media set in the printer, you may not receive the desired print results.
•
Paper Source
You can select the paper source.
Setting the Print Parameters
iPF685
User's Guide
Mac OS Software Color imageRUNNER Enlargement Copy
318
To Next Page
Loading...
Need help?
General