4
The Confirm Update dialog box is displayed.
Configure Update Target and click the Execute but-
ton.
Communication with the printer begins.
Note
•
You should normally select Update the printer control panel and printer driver.
Important
•
When setting a data to the printer that differs from the data to be updated, the selected media informa-
tion file is updated. When you would like to remain the data that is set to the printer, click the Cancel
button.
•
Do not attempt to print or turn the printer off while the program is communicating with the printer.
5
Click the OK button.
Checking the update
Checking the update
After updating the media information using the Media Configuration Tool, you can check whether the update has
been applied to the printer in the control panel of the printer.
1
Click the About button in the Media Configuration Tool main window to open the About dialog box.
2
Check the value xx.xx (xxxx) of MIT DB Version.
3
Check the value xx.xx (xxxx) of MIT in Set./Adj. Menu > Printer Info > System Info in the printer control
panel.
If the values in Steps 2 and 3 are the same, the update has been applied to the printer.
Checking the update
iPF685
User's Guide
Handling and Use of Paper Media Configuration Tool (Windows)
382
To Next Page
Loading...
Need help?
General