Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ................................................................................................................................ 613
Borderless printng not possible. ..................................................................................................................... 609
Cannot adjust paper feed. .............................................................................................................................. 612
Check printed document. ............................................................................................................................... 612
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔P.546
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔P.547
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") ➔P.530
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") ➔P.531
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") ➔P.547
Cannot adjust paper feed.
iPF685
User's Guide
Error Message Messages regarding printing or adjustment
612
To Next Page
Loading...
Need help?
General