Printer status and modes
The printer has the following status.
Standby The printer is ready to receive jobs sent from the computer. Jobs sent from the computer are printed
immediately.
Printing Paused Printing is paused on the printer. Any jobs sent from the computer are held without being printed.
Printing Printing is in progress on the printer. Jobs sent from the computer are printed after the current job.
The time left until printing is finished is indicated in the upper-right corner of the screen. (Values ex-
ceeding 10 hours are not shown.)
Sleep The printer is in power-saving mode. The printer automatically enters Sleep mode to conserve power
when idle for a specific period (by default, five minutes), that is, if no print jobs are received or buttons
are pressed while all covers are closed.
You can specify the period before the printer enters Sleep mode in the Sleep Timer menu. (See
"Menu Settings.") ➔P.418
After entering Sleep mode from Standby mode, the printer automatically recovers if print jobs are re-
ceived, and the jobs are printed.
Off The printer is not on.
If no operations are performed on the printer for the duration of the time set in Shut Down Timer after
entering Sleep mode, the printer automatically turns off. (See "Menu Settings.") ➔P.418
Error The printer requires your attention. Any jobs sent from the computer cannot be processed. The tab
related to the error is displayed.
For information about the display in the case of multiple errors, see "Display Transitions in Error Sta-
tus."
iPF685
Control Panel Display
User's Guide
Control Panel Operations and Display Screen
403
To Next Page
Loading...
Need help?
General