Borderless printng not possible.
Borderless printng not possible.
Cause Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.331
Press â–² or â–¼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
The loaded paper is a size not
compatible with borderless print-
ing.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press â–² or â–¼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.") âž” P.345
(See "Removing the Roll Holder from Rolls.") âž” P.348
2.
Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.") ➔P.338
(See "Loading Rolls in the Printer.") ➔P.341
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.331
Press â–² or â–¼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the supported
width for borderless printing.
Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.331
Paper position not suitable for borderless printing.
Paper position not suitable for borderless printing.
Cause Corrective Action
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.331
The paper is loaded askew. Press â–² or â–¼ to select Fix Paper Position and straighten the paper so that the edges are be-
tween the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.") ➔P.338
Press â–² or â–¼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
Roll paper is not securely in contact with roll holder.
Roll paper is not securely in contact with roll holder.
Cause Corrective Action
When the roll was loaded, the roll was not inserted firmly all
the way on the Roll Holder.
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Attaching the Roll Holder to Rolls.") ➔P.338
3.
Load the Roll Holder in the printer.
iPF685
Borderless printng not possible.
User's Guide
Error Message Messages regarding paper
609
To Next Page
Loading...
Need help?
General