Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require
a lot of ink. In this case, replace or prepare to replace the Ink Tank before maintenance.
If a message for ink replacement is shown on the Display Screen
When ink runs out, the Message Lamp flashes, a message regarding Ink Tank replacement is shown on the Dis-
play Screen, and printing is disabled. Replace the Ink Tank at this point.
Attach the Ink Tank Cover to the printer
Attach the Ink Tank Cover to the printer
If too much force is applied to the Ink Tank Cover while it is open, Ink Tank Cover may become detached from the
printer.
If the Ink Tank Cover has become detached from the printer, attach it using the following procedure.
Note
•
Although the attachment procedure describes the Ink Tank Cover on the right side of the printer, the Ink Tank Cover
on the left side can also be attached using the same procedure.
1
Rotate the Ink Tank Cover attachment part and store it in the printer.
Attach the Ink Tank Cover to the printer
iPF685
User's Guide
Maintenance and Consumables Ink Tanks
544
To Next Page
Loading...
Need help?
General