Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loaded
does not match the type specified in the printer
driver.
Press â–² or â–¼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper loa-
ded does not match the type specified in the
printer driver.
You can continue to print, but note that this error may cause paper jams or prob-
lems in the printing results.
The paper is too small.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause, paper smaller than the
size specified in the printer driver is loaded.
Press â–² or â–¼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the
printer as follows.
1.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the print-
er and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1.
Press â–² or â–¼ to select Change Paper, and then press the OK button to stop
printing.
2.
Replace the loaded paper to match the settings in the printer driver and try print-
ing again.
(See "Loading and Printing on Rolls.") ➔P.18
(See "Loading and Printing on Sheets.") ➔P.21
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than
the size specified in the printer driver is loa-
ded.
You can continue to print, but note that this error may cause problems in the print-
ing results.
The paper is too small.
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
Cause Corrective Action
The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press â–² or â–¼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.") ➔P.363
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.") ➔P.21
The printer will resume printing.
Press â–² or â–¼ to select Stop Printing, and then press the OK button.
"Replace roll with 10 in. wide or larger roll."
Cause Corrective Action
The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.
1.
Press â–² or â–¼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.") âž” P.345
(See "Removing the Roll Holder from Rolls.") âž” P.348
2.
Replace the roll with a roll 10 inches wide or larger.
(See "Attaching the Roll Holder to Rolls.") ➔P.338
(See "Loading Rolls in the Printer.") ➔P.341
iPF685
The paper is too small.
User's Guide
Error Message Messages regarding paper
603
To Next Page
Loading...
Need help?
General