Setting Details
Brightness Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Contrast Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Saturation Adjusts the hues for vivid color or dark color.
Gray Tone Adjusts gray from cool black (bluish tones) to warm black (reddish tones).
Note
•
You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Adjusting Monochrome
Use the monochrome setting to print monochrome images of color photographs captured with a scanner or digital
camera or other color images.
1
Select Monochrome on Color Mode in the Color Settings panel.
2
Select Color Adjustment.
3
Drag each slider to the left or right to adjust.
Setting Details
Brightness Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Contrast Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Color Adjustment
iPF685
User's Guide
Mac OS Software Free Layout
298
To Next Page
Loading...
Need help?
General