6
Using both hands, rotate the Roll Holder toward the back
to rewind the roll.
7
Holding the Roll Holder flange (a), remove the holder
from the Roll Holder Slot.
Note
•
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from
Rolls." ➔P.348
8
Holding it at the positions indicated, close the Roll Cover.
Note
•
To load new roll paper in the printer at this point, see "Loading Rolls in the Printer." âž” P.341
iPF685
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
347
To Next Page
Loading...
Need help?
General