Important
•
For a more secure method of preventing data recovery, we recommend physically or magnetically destroying the
hard disk. In this case, the hard disk can no longer be used.
•
Erase HDD Data is not available if there is a job queue.
Additionally, print jobs are not processed during execution of Erase HDD Data.
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to
select the Settings/Adj. tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press â–² or â–¼ to select System Setup, and then press the OK button.
4
Press â–² or â–¼ to select Erase HDD Data, and then press the OK button.
5
Press â–² or â–¼ to select High Speed, Secure High Spd., or Secure, and then press the OK button to dis-
play the confirmation screen.
Note
•
If a password has been set on the printer, the Admin.Pswd screen is displayed. In this case, enter the
password and press the OK button to go to the next step.
•
As for the time required for deletion, confirm it on the Control Panel. However, when High Speed is selec-
ted, this finishes in several seconds.
6
Press â–² or â–¼ to select Yes, and then press the OK button to start erasure.
After the printer hard disk is erased, the printer automatically restarts.
Erasing Data on the Printer's Hard Disk
iPF685
User's Guide
Printer Parts Hard Disk
444
To Next Page
Loading...
Need help?
General