4
Press â–² or â–¼ to select the type of paper, and then press the OK button.
Note
•
When Head Height is set to Automatic, the setting value selec-
ted for the previous print job is displayed (to the right of Auto-
matic ) once you select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or
the paper is replaced.
5
Press â–² or â–¼ to select Head Height, and then press the OK button.
6
Press â–² or â–¼ to select the desired setting value, and then press the OK button.
Note
•
Using Automatic will ensure that the printer adjusts the Printhead height to the optimal level before print-
ing, accounting for the ambient temperature and humidity. When a setting other than Automatic is used,
that value will always be applied.
•
Depending on the type of paper, some setting values may not be available.
Troubleshooting Paper Abrasion and Blurry Images
iPF685
User's Guide
Adjustments for Better Print Quality Adjusting the Printhead
528
To Next Page
Loading...
Need help?
General