3
Positioning your hands as shown, open the Roll Cov-
er.
4
Fold an A4 sheet lengthwise four times and insert it
through the gap of the Paper Feed Slot. Push the scrap
out toward the Platen.
5
Remove the scrap when it is pushed out onto the Platen.
6
If any scraps remain inside the paper feed slot, repeat steps 4 and 5.
7
Holding it at the positions indicated, close the Roll Cover.
iPF685
Clearing Jammed Paper (Paper Feed Slot)
User's Guide
Troubleshooting Problems Regarding Paper
579
To Next Page
Loading...
Need help?
General