6
In Paper Size, enter the height and width of the original. Here, enter 430 mm in Height and Width.
7
In Non-Printable Area, enter 5 for the top and side margins and 23 for the bottom margin. Here, measure-
ments are entered in millimeters.
8
Double-click Untitled in the list at left in the Custom Paper Sizes dialog box and enter the paper name—in
this case, 430*430.
9
Click OK to close the Custom Paper Sizes dialog box.
10
In the F Paper Size list, click the size of the original. In this case, click 430*430, the size you registered.
11
If you configured the settings using the Page Attributes dialog box, click OK to close the dialog box, and
then select Print from the application software menu.
12
Access the Main pane.
13
In the A Media Type list, select the type of paper that is loaded.
14
After confirming that D Easy Settings is selected, select from the E Print Target list.
15
Make your selection in the F Print Quality list.
iPF685
Printing on Non-Standard Paper Sizes (Mac OS)
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
99
To Next Page
Loading...
Need help?
General