Canon iPF671 - Stand (ST-26)

Chapter 1
1-4
1.2.6 Stand (ST-26)
0023-5227
The stand [1] is equipped with casters so that the printer can be easily moved. The output stacker [2] included with stand can use by the two ways of the regular
position or extended position.
F-1-9
MEMO:
- When delivering the printing to the output stacker: Use the position [A].
- When not using the output stacker or moving the printer: Use the position [B]. When moving the printer, raise the auxiliary rod to the position of extended position.
The output stacker may touch the floor and be soiled or damaged.
F-1-10
[Regular position]
F-1-11
[1]
[2]
[A]
[B]