Chapter 5
5-2
*3: When displaying the message of "W: Level1" or "W: Level2", the printer continues to operate. And when displaying the error code, the printer stops
to operate.
*4: The operation panel do not display the message, but the condition is printed in the "PRINT INF".
- Maintenance Kit
After supplies have been replaced, execute [INITIALIZE] > [PARTS COUNTER] > [PARTS xx] in service mode to initialize (clear) the parts counter information.
Kit name Parts number Counter name Name
MAINTENANCE KIT (CR/Mi) QY6-1535 CR1/CR2/CR4/CR5 CARRIAGE UNIT
CR3 SCALE, LINEAR
Mi1 FAN UNIT
To Next Page
Loading...
