Canon iPF671 - Page 282

Chapter 7
7-26
g) SETTING
Make various settings.
1) Pth
Turn on or off the head pulse rank control function.
Default: OFF
2) RTC
Set RTC (real time clock) after replacing the lithium battery on the main controller PCB.
3) PV AUTO JUDGE
Sets ink saver mode.
Default: OFF
4) NETWORK
See "e-maintenance/imageWARE Remote" for detail.
5) E-RDS
See "e-maintenance/imageWARE Remote" for detail.
6) HEAD DOT INF
Select whether to display the message as the result of non-discharging nozzle detection or not.
Default: ON
7) TSC
Make indication settings about TSC.
T-7-2
Display Description
DATE yyyy/mm/dd Set date
TIME hh:mm Set time
Number of non-discharging
nozzle (nozzle/2,560-nozzles)
ON OFF
0-99 Displays a message to check the
printing.
-
100-319 Displays a message to check the head. -
320 or more Displays a message to replace the head.
Display Description
TTL PRINT AREA Select whether to display the total printing area or not (Default:
ON)
INK CONSUMED Select whether to display the amount of ink consumption or not
(Default: OFF)
DUTY CNT Select whether to display the Duty counter or not (Default: ON)
DISPLAY DECIMAL TTL PRINT AREA Select whether to display the decimal fraction of total printing
area or not (Default: ON)
INK CONSUMED Select whether to display the decimal fraction of amount of ink
consumption or not (Default: ON)
DUTY CNT Select whether to display the decimal fraction of Duty counter or
not (Default: ON)
UNIT TTL PRINT AREA Set the unit of total printing area
Setting value: LENGTH UNIT* (default)/A4/LETTER
*: The setting is in accord with [Lenght Unit] in the Main menu.
DUTY CNT Set the unit of Duty counter
Setting value: LENGTH UNIT*/A4 (default)/LETTER
*: The setting is in accord with [Lenght Unit] in the Main menu.