Chapter 7
7-39
Print item Print content Printed value
JAM 01-05 JAM log (5 records) Number: Lowest is the most recent
Date: mm/dd
Time: mm/ss
Jam code
01 Jam type 1: CR error
2: Jam
3: Feed failure (delay)
4: Cut failure
*: Unknown
02 Media format 1: Roll media
2: Cut sheet
*: Unknown
03 Jam timing 1: Feed
2: Print
3: Eject
*: Unknown
04 Width detection OFF mode 1: ON
2: OFF
*: Unknown
05 Head height 0: SL (1.0mm)
1: L (1.3mm)
2: M1 (1.8mm)
3: M2 (2.0mm)
4: M3 (2.2mm)
5: H (2.6mm)
*: Unknown
06 1: Fully close
2: Only HP side open
3: 1/4 open
4: 1/2 open
5: 3/4 open
6: Fully open
*: Unknown
07 Cut mode 1: User cut
2: Eject cut
3: Auto cut
*: Unknown
08 Media passing environment 0: A(temperature 15 to 25 degrees centigrade/humidity
40 to 60%)
1: B(temperature 25 to 30 degrees centigrade/humidity
40 to 60%)
2: C(temperature 15 to 30 degrees centigrade/humidity
10 to 40%)
3: D(temperature 15 to 30 degrees centigrade/humidity
60 to 80%)
4: E(temperature 15 to 30 degrees centigrade/humidity 0
to 10%, or 15 degrees centigrade or less and 30 degrees
centigrade or more/humidity 0 to 50%[low humidity is
out of guarantee.])
5: F(temperature 15 to 30 degrees centigrade/humidity
80 to 100%, or 15 degrees centigrade or less and 30
degrees centigrade or more/humidity 50 to 100%[high
humidity is out of guarantee.])
*: Unknown
09 Borderless/Bordered 1: Bordered printing
2: Borderless printing
*: Unknown
10 Print mode label No. Display print mode
*: Unknown
11 Media size Display size
*: Unknown
12 Media type Display media name
*: Unknown
INK CHK (The ink color is
indicated)
Refill log
Print whether disable remaining ink detection was
previously set
0: Disable remaining ink detection was never set
1: Disable remaining ink detection was set at least once
To Next Page
Loading...
