Via print server
It takes a long time before printing starts.
Did you print on narrow paper? After you print to narrow width paper, the machine may wait until the temperature inside the
machine has fallen before resuming printing. This is done to maintain printing quality. As a result, it may take some time before
the next job is printed. Wait until the machine is ready to print. Printing will resume when the temperature inside the machine
has fallen.
A blank sheet is output (nothing is printed).
Did you pull the sealing tape out when loading the toner cartridge? If you did not pull it out, remove the toner cartridge, pull
the sealing tape out, and reload the toner cartridge.
How to Replace Toner Cartridges
your local authorized Canon dealer or the Canon help line.
Can you print from the print server? If you can print from the print server, check the connection between your
computer and the print server.
Problems via the Print Server
Disable security software and other resident software.
Reinstall the printer driver.
Printer Driver Installation Guide
Can you print from other computers via the print server? If you also cannot print from other computers, contact your
local authorized Canon dealer or the Canon help line.
㻝㻡㻝㻌㻛㻌㻞㻝㻥
To Next Page
Loading...
