Canon LBP6030B - Initializing System Management Settings

0HWJ-048
Initializing System Management Settings
You can initialize the settings in the Remote UI [System Management Settings] menu ( Setting Menu List) to return them to the
factory default settings.
To initialize [Key and Certificate Settings] and [CA Certificate Settings] in [Security Settings], see Initializing Key and
Certificate Settings.
Start the Remote UI and log on in System Manager Mode. Starting the Remote UI
Click [Settings/Registration].
Click [Initialize Setting Information] [Initialize System Management Settings].
Select the settings to initialize, and then click [Initialize].
[Setting Information to Initialize]
Select the settings to initialize from the drop-down list. Select [Initialize All] to initialize all of the settings in [System Manager
Information], [Device Information], [Security Settings], and [Network Settings] at once.
Click [OK].
1
2
3
4
5
㻝㻣㻢㻌㻛㻌㻞㻝㻥