Special Mode V
Adjust this setting if the print paper curls or wrinkles.
Off
Mode 1
Mode 2
Mode 3
To enable the setting
This setting is enabled in the following conditions.
The paper
size is
set
to
<B5>,
<A5>,
<STMT>,
or <EXEC>
<Paper Type>
is
set
to
<Plain>,
<Plain
L>, <Recycled>,
<Color>, or
<Envelope>
After the setting is enabled
Print speed is slower.
Special Mode Z
Adjust this setting if streaks adhere to the print paper.
Off
Mode 1
Mode 2
Mode 3
Mode 4
After the setting is changed
By specifying <Off> or <Mode 1>, streaks may adhere to the print paper. By specifying <Mode 3> or <Mode 4>, outlines may be
blurred or images may appear somewhat grainy. The print density becomes lighter as the setting progresses from <Off> to <Mode
4>.
After printing from a smartphone or tablet
<Adjustment/Maintenance> <Special Processing> <Special Mode V> Select
the mode
<Adjustment/Maintenance> <Special Processing> <Special Mode Z> Select
the mode
㻞㻠㻜㻌㻛㻌㻟㻟㻢
To Next Page
Loading...
